Baking Paint Custom Solid Core Door Solid Wood Interior Doors Prehung Arched Raised Brass Fittings Soundproof Bedroom

The Baking Paint Custom Solid Core Door represents the highest tier of our interior door portfolio — a premium product finished with automotive-grade baking paint technology that delivers a flawless, glass-smooth surface unmatched by conventional spray finishes. The baking (thermosetting) process chemically cross-links the paint at elevated temperatures, producing a finish with exceptional hardness, chemical resistance, and color retention. Paired with brass fittings as standard equipment, this prehung door unit — complete with arched raised panel design — is the definitive choice for projects where surface perfection is non-negotiable.

The solid core construction features selectable internal fill (bridge-opening mechanical board, solid wood mesh, or aluminum honeycomb) for tailored acoustic performance, supported by a 30mm thickened door frame for structural integrity. The flat-opening configuration with left/right swing flexibility ensures compatibility with any room layout. Multiple surface processing technologies are available — baking paint (premium gloss/matte), spray painting, wood veneer, ecological PP film, and paint-free PVC/CPL lamination — allowing you to balance aesthetic requirements against budget across different rooms within the same project. All doors undergo anti-termite and anti-borer treatment, with moisture resistance certified at 72 hours / 95% RH. Full compliance documentation includes CE EN 14351-1, RoHS, ISO 9001, and GB 18580-2017 E0. Our OEM/ODM program customizes dimensions, door leaf thickness (40/45/50mm), core fill, surface processing, color, and hardware. Operating range: -20°C to 45°C.

• Automotive-Grade Baking Paint Finish: Thermosetting paint cured at high temperature produces a surface with Rockwell hardness surpassing conventional finishes — resistant to scratches, chemicals, UV fading, and everyday wear far beyond standard painted doors.
• Premium Brass Fittings Included: Factory-installed solid brass hinges, handle set, and latch plate in polished or satin brass finish — elevating the entire door package to a level appropriate for luxury residential and high-end commercial installations.
• Prehung Arched Raised Panel Design: Complete door-and-frame unit with classic arched raised panel detailing, 30mm thickened frame, and pre-installed hardware — arrives ready for efficient installation with guaranteed alignment.
• Flat-Opening Configuration: Available in left-hand or right-hand swing with standard flat-opening design — compatible with virtually all standard interior door rough openings and framing conventions worldwide.
• Complete Certification Portfolio: CE EN 14351-1, RoHS, ISO 9001, GB 18580-2017 E0, GB/T 8485-2008. 72hr @ 95% RH moisture resistance. anti-termite/anti-borer. -20°C to 45°C. Full OEM/ODM customization.

For the Baking Paint Custom Solid Core Door, a wood-based door construction is used, selected to match the required design, dimensions, finish, and application. The material and construction specification can be settled with the customer before production, ensuring the finished door aligns with the approved project requirements.

The visible surface can be supplied in selected natural wood or natural wood veneer, according to the specified door construction. Species such as oak, walnut, cherry, and others may be available, in line with project requirements and material availability.

Natural wood can vary in grain direction, color, knots, and texture. Because these variations are inherent to timber, each finished door may present a slightly different appearance.

When a uniform look is needed across multiple doors, the species, veneer selection, grain direction, stain or paint color, and finishing requirements can be fixed during the sample approval stage.

Internal construction is selected according to the required door performance, weight, dimensions, and application. Based on the approved specification, the door may be built with the confirmed solid wood composite core or an alternative project-specified structural material.

The core carries the main structural body of the door and is enclosed within the specified surface materials. Door thickness, internal construction, edge treatment, and reinforcement can be adapted to the final production specification.

For oversized doors or project-specific configurations, structural details can be reviewed at the technical confirmation stage before volume production.

Ahead of final finishing, the door surface passes through controlled preparation stages such as machining, sanding, surface inspection, and finishing.

The final finish can be defined according to the project, including an automotive-grade baking paint finish with brass fittings, natural wood appearance, stained finishes, painted finishes, or other available surface treatments. Where applicable, color references such as RAL or NCS can be used for project color matching.

Before shipment, the final appearance is checked against the approved sample or specification.

Edges are machined to the approved dimensions and installation configuration. Cut-outs or preparation for hinges, locks, handles, and other hardware can be included in line with the confirmed hardware specification.

Where a complete door set is required, the door leaf can be provided together with a matching frame and selected hardware components, subject to the project configuration.

As a bespoke product, the final material and construction are confirmed for the specific project instead of a single fixed configuration.

Customers can discuss and confirm:

• Wood species and veneer selection
• Door thickness and dimensions
• Core construction
• Surface and finishing requirements
• Panel or woodgrain design
• Edge details
• Hinge and lock preparation
• Door frame configuration
• Hardware requirements
• Packaging requirements

Samples of materials, technical specifications, drawings, and production details can be reviewed and approved before bulk manufacturing.

For every order, material and construction specifications should be confirmed against the final quotation, approved sample, technical drawing, or production specification.

The Baking Paint Custom Solid Core Door is manufactured in accordance with the approved product specification, drawings, material requirements, and finishing instructions. Production covers material preparation, precision machining, surface treatment, assembly, and final inspection so the finished door matches the approved specification.

Specified materials such as wood, veneer, and engineered wood are readied in line with the confirmed production requirements.

Ahead of processing, materials are inspected for visible defects, dimensions, surface condition, and suitability for the specified construction. Natural wood and veneer can vary in grain, color, knots, and texture, and this is taken into account during material selection and layout.

Materials are cut and machined to the approved dimensions and door construction.

Depending on the product configuration, machining may cover:

• Door panel cutting
• Core preparation
• Edge machining
• Groove or panel detailing
• Hinge preparation
• Lock and hardware preparation
• Frame component machining

Production dimensions follow the confirmed technical specification rather than a generic standard configuration.

The prepared components are assembled into the specified door construction.

During assembly, the production team checks component alignment, dimensions, joints, edges, and structural fit. For customized orders, production follows the approved drawings and component specifications issued for the project.

After structural processing, the door surface is prepared for the specified finish.

Typical preparation may include:

Machining → Sanding → Surface Cleaning → Inspection → Finishing

Sanding and surface preparation help create a suitable base for the final natural, stained, painted, or other specified finish.

The finishing process is chosen according to the approved surface specification.

Depending on the order, this may include natural wood finishes, stains, painted finishes, or other available treatments. For projects that require a specific color, customers can provide an approved color reference or an applicable RAL/NCS reference for production confirmation.

The finished surface is visually inspected for consistency, visible defects, surface quality, and conformity with the approved sample or specification.

Where hardware is included in the order, the door can be prepared for the specified hinges, locks, handles, and related components.

Hardware positions and preparation details are confirmed against the approved configuration before production. Complete door sets can also be coordinated with the corresponding frame and hardware requirements.

Before packaging, finished doors go through a final inspection based on the applicable production requirements.

The inspection may cover:

• Overall dimensions
• Door thickness
• Surface appearance
• Edge condition
• Panel or groove alignment
• Hardware preparation
• Finish consistency
• Packaging condition

Any project-specific inspection requirements can be built into the production specification where agreed in advance.

After final inspection, the completed doors are prepared for shipment with protective packaging appropriate to the product dimensions, quantity, and transportation requirements.

Protective materials are applied to reduce the risk of surface damage during handling and transportation. Packaging methods can be discussed and confirmed for residential, commercial, hotel, or other project shipments.

The photographs in this section show the actual manufacturing environment and production activities associated with our door manufacturing process. Where applicable, production records, approved drawings, material specifications, inspection records, and product certificates can be provided as supporting documentation for the corresponding order.

Note: Manufacturing steps and material configurations may vary according to the door design, construction, finish, hardware, and project requirements. Final production details are confirmed through the approved quotation, technical drawing, sample, and production specification.

Quality control is carried out at every stage of manufacturing, not solely at final inspection. For bespoke interior doors, inspection requirements are set by the confirmed product specification, approved drawings, material requirements, finishing requirements, and hardware configuration for each order.

Materials are checked before they enter production to confirm that they match the approved requirements.

Depending on the order, checks may cover:

• Material type and specification
• Wood or veneer appearance
• Visible surface defects
• Material dimensions
• Color and grain characteristics
• Core or structural material condition

For natural wood and veneer, differences in grain, knots, texture, and color are inherent to the material and are considered during material selection.

Door components are checked during machining and assembly so that the manufactured dimensions match the confirmed production requirements.

Typical inspection points include:

• Door height
• Door width
• Door thickness
• Edge dimensions
• Panel or groove positions
• Hardware preparation locations

For customized orders, the applicable dimensions are taken from the approved technical drawing or production specification.

During assembly, production personnel check the fit and alignment of the main door components.

Inspection may cover:

• Component alignment
• Joint condition
• Door edge condition
• Panel positioning
• Frame compatibility where applicable
• Hardware preparation

Any project-specific structural requirements are reviewed against the approved product configuration.

The finished surface is visually inspected after sanding and finishing.

Inspection points may cover:

• Surface smoothness
• Visible scratches or damage
• Uneven finishing
• Color consistency
• Veneer or woodgrain appearance
• Edge finishing
• Paint or coating surface condition

For customized colors or finishes, the finished product can be compared with the approved sample or agreed color reference.

Where hinges, locks, handles, or other hardware are specified, the corresponding preparation is checked against the approved hardware configuration.

The inspection may cover:

• Hinge positions
• Lock preparation
• Handle preparation
• Hardware dimensions
• Component alignment
• Door and frame compatibility

Hardware requirements are confirmed before production for customized door sets.

Before packaging, the completed door is reviewed against the applicable order requirements.

The final inspection may include:

Dimensions → Appearance → Surface Finish → Edges → Hardware Preparation → Overall Condition

The inspection results can be recorded according to the applicable production and project requirements.

Before shipment, packaging is checked to confirm that the finished doors have suitable protection for handling and transportation.

Depending on the order, packaging may include protective corner materials, surface protection, cartons, pallets, or other protective methods.

Packaging requirements can be adjusted according to door dimensions, order quantity, transportation method, and project requirements.

Where applicable, supporting quality documentation can be provided according to the order and product configuration. This may include approved technical drawings, material specifications, inspection records, product certificates, and relevant test documentation.

The exact inspection items and documentation provided for each order depend on the confirmed product specification and applicable project requirements.

Certification and testing documentation is issued according to the applicable product specification, material configuration, and project requirements. The documents shown on this page are meant to give verifiable information about our manufacturing and product-related quality requirements.

Where applicable, relevant certifications can be provided to support the applicable manufacturing system, product configuration, or material requirements.

Each certificate should be reviewed together with its:

• Certificate number
• Issuing or certification organization
• Applicable standard or regulation
• Certified company or product scope
• Issue date and validity period
• Relevant product or manufacturing category

This information lets customers verify the scope of a certification rather than relying only on a certification logo or statement.

For projects that require specific performance or material verification, relevant test reports may be available according to the confirmed product construction and specification.

Depending on the product configuration and project requirements, documentation may relate to areas such as:

• Material composition
• Formaldehyde or emissions testing
• Surface or coating performance
• Fire performance
• Acoustic performance
• Structural or mechanical properties
• Other applicable product requirements

Testing documentation applies only to the product, material, construction, or configuration identified in the corresponding report.

Where specific wood products, engineered wood materials, adhesives, coatings, or other components are used, relevant material documentation can be provided when available.

For projects with environmental or material compliance requirements, customers can confirm the required standards and documentation before production.

To keep product information accurate, certification and testing claims are based on the scope of the corresponding document.

Customers can request the applicable documentation for review before placing a bulk order. Where a test report applies to a specific construction, material, size, or product configuration, the same requirements should be confirmed for the intended order.

Depending on the product and project requirements, supporting documentation may include:

• Product certificates
• Factory or quality management certificates
• Material certificates
• Test reports
• Technical specifications
• Approved product drawings
• Inspection records
• Material specifications
• Other applicable compliance documentation

Important: Certification and testing requirements vary according to product construction, materials, destination market, and project specification. Please contact our team to confirm which documents apply to the specific door configuration and order.

Positioned for the luxury segment — premium master bedroom suites, penthouse apartment entries, executive boardroom antechambers, five-star hotel suites, high-end restaurant private dining areas, and luxury retail fitting rooms. The baking paint finish and brass hardware package make this door particularly well-suited to projects where the interior door is treated as an architectural feature rather than merely a functional partition. Popular in luxury residential developments in Dubai, Singapore, London, and other global property markets where discerning buyers expect superlative finish quality.

The Baking Paint Custom Solid Core Door is prepared for shipment according to its dimensions, quantity, finish, hardware configuration, and transportation requirements. Packaging is planned once the finished products have completed the applicable inspection process so as to protect the doors during handling, loading, and international transportation.

Before packaging, finished doors are checked against the applicable production requirements.

The inspection may cover:

• Door dimensions
• Surface and finish condition
• Edge condition
• Hardware preparation
• Door and frame configuration where applicable
• Overall product condition

Any project-specific packaging or shipping requirements can be confirmed before the order enters the packaging stage.

Finished wood doors need protection against scratches, impacts, dust, and handling during transportation.

Depending on the product and shipping requirements, protective materials may be applied to vulnerable areas such as:

• Door surfaces
• Door edges
• Corners
• Hardware areas
• Finished or painted surfaces

The specific protection method is selected according to the door construction and finish.

Individual doors can be protected with suitable packaging materials before being grouped for shipment.

For customized orders, packaging can be arranged according to:

• Door dimensions
• Door quantity
• Door weight
• Surface finish
• Hardware configuration
• Shipping method
• Customer handling requirements

The aim is to maintain suitable protection while allowing the products to be handled efficiently during loading and unloading.

Depending on the order and transportation requirements, available packaging methods may include cartons, pallets, protective frames, or wooden crates.

For larger project orders or long-distance international shipments, customers can discuss additional protection requirements with our team before production and shipment.

The final packaging method is confirmed according to the product dimensions, quantity, shipping arrangement, and agreed project requirements.

When doors are supplied with frames or hardware, components can be packaged and protected according to their configuration.

Hardware and accessories can be individually protected or packed with the corresponding door set where appropriate. Identification labels can also be arranged according to the confirmed order requirements to assist with receiving and installation.

Before loading, packaged products are organized according to the shipment plan.

The loading process may include:

Final Inspection → Packaging → Product Identification → Loading Preparation → Container Loading

For project shipments, products can be arranged to facilitate unloading, inventory checking, and subsequent installation where this has been agreed in advance.

We support packaging and shipment preparation for customized residential, renovation, hospitality, and commercial door orders.

Shipping arrangements can be discussed according to:

• Order quantity
• Product dimensions
• Destination
• Shipping method
• Delivery schedule
• Packaging requirements
• Project handling requirements

The final shipping arrangement is confirmed with the customer before dispatch.

The photographs in this section show actual packaging, finished products, loading, or shipment-preparation activities from our manufacturing operations, where available.

Using real production and shipment photographs allows customers to understand how finished doors are prepared before leaving the manufacturing facility.

Packaging and shipping methods may vary according to the product configuration, order quantity, transportation method, and project requirements. Final packaging details should be confirmed with the production and shipping teams before shipment.

Project Type: Boutique Hotel Guest Rooms

This project required baking-paint solid core interior doors with an automotive-grade baking paint finish with brass fittings and coordinated hardware. YSM Doors confirmed the door specifications, materials, finish and hardware requirements prior to production.

The doors were manufactured according to the approved specifications, with quality checks carried out during machining, assembly, surface finishing and final inspection. Each finished door was photographed and carefully packaged for international shipment.